|
|
ESTIMATE YOUR FUEL CONSUMPTION SAVINGS
To estimate your fuel savings with a consumption in LITERS / HOUR use the TABLE 1.
To estimate your fuel savings with a mileage in KMS / LITER use the TABLE 2.
For FARM EQUIPMENT and HEAVY MACHINERY use the TABLE 1 + TABLE 2.
TABLE 1 - FOR GENERATOR - BOAT - VESSEL - YACHT
HOW TO USE THE TABLE 1
Click on the RED RECTANGLES in the table below and type the values matching your engine's technical datas and use.
3 informations are necessary to estimate the fuel savings:
- Engine conditions
- Engine fuel consumption at 100% load (ask your engine's manufacturer)
- Engine actual average fuel consumption
Wait for a few seconds and you will get automatically (in blue color) an estimatation of:
YOUR POSSIBLE FUEL SAVINGS, in percentage of your actual fuel consumption.
>
TABLE 1
If the TABLE 1 is not opening click on the following link: ECONOKIT GENERATOR SAVINGS
to dowload the Excel file.
The load rate on your engine is directly correlated with the effects of the Econokit system.
If the load estimated on your engine is below 20% you will get the answer: " NO ECONOKIT ".
If you get this message then it is not advisable to install an Econokit system because the results on fuel and pollution savings could be insignificant.
THIS IS THE ONLY VALID REASON FOR NOT INSTALLING AN ECONOKIT SYSTEM.
HOW TO ESTIMATE YOUR PROFITS
TABLE 2 - FOR BUS - LORRY - SEDAN - VAN - MPV - SUV
HOW TO USE THE TABLE 2
Click on the RED RECTANGLES in the table below and fill it with values matching your engine's technical datas and use.
You can modify only the green values inside the RED CELLS
- Your engine condition (no black smokes"1", little black smokes "2" or lot of black smokes "3")
- Your engine horsepower (check the manufacturer technical datas about your engine)
- Your distribution of use between City roads, National Highway and Motorway
(total of distribution should be 100%)
- Your average speed on City roads, National Highway and Motorway
- Your engine type : Gasoline "1", Diesel/Turbo Diesel "2" or Common Rail Diesel "3"
- Your vehicle mileage
Enter the informations and wait for a few seconds.
You will get automatically an estimation of:
- YOUR VEHICLE AVERAGE SPEED
- YOUR VEHICLE LOAD RATE
- YOUR VEHICLE POSSIBLE SAVINGS ON FUEL
TABLE 2
If the TABLE 2 is not opening click on the following link: ECONOKIT BUS SAVINGS
to dowload the Excel file.
The load rate on your engine is directly correlated with the effects of the Econokit system.
If the load estimated on your engine is below 20% you will get the answer: " NO ECONOKIT ".
If you get this message then it is not advisable to install an Econokit system because the results on fuel and pollution savings could be insignificant.
THIS IS THE ONLY VALID REASON FOR NOT INSTALLING AN ECONOKIT SYSTEM.
HOW TO ESTIMATE YOUR PROFITS
FOR FARM EQUIPMENT - HEAVY MACHINERY
To estimate accurately your possible fuel savings with farm equipment and heavy machinery, you should use the 2 tables:
- TABLE 1 : to estimate the fuel savings when your vehicles is at work usually with heavy load in MACHINE mode (consumption in LITERS / HOUR)
- TABLE 2: when your vehicle is moving on the roads or in the fields in VEHICLE mode (consumption in KMS / LITER).
The possible savings are the result of the correct combination of the 2 results obtained from TABLE 1 and TABLE 2.
You should calculate the average, based on the use of your vehicle :
For example : 70% use in machine mode + 30% use in vehicle mode
So your possible savings = (TABLE 1 results x 70%) + (TABLE 2 results x 30%)
If you find it too complicated, then i suggest you to use a MINIMUM VALUE of 10% to 15%
which you will definitely get.
HOW TO ESTIMATE YOUR PROFITS
OUR SPECIAL LAUNCHING OFFER
|
SPECIAL OFFER
RISK FREE
30 DAYS
|
|
You can use and test Econokit during ONE FULL MONTH WITHOUT ANY RISK !
If you are not fully satisfied after ONE MONTH we will give you 100% of your MONEY BACK IMMEDIATELY after removing the Econokit system (*).
THIS IS OUR GUARANTEE
100% RISK FREE FOR YOU
LIMITED OFFER VALID ONLY DURING THE ECONOKIT LAUNCHING PERIOD.
DO NOT MISS THIS SPECIAL OPPORTUNITY
ASK US NOW FOR A RISK-FREE TRIAL
This email address is being protected from spambots. You need JavaScript enabled to view it.
(*) Prior to the Econokit system installation we will measure your fuel consumption and if necessary your engine pollution and we will supply you the distilled water needed during one month. If you are not satisfied with the Econokit system 30 days after the commissioning date, we will give you 100% of your money back if the savings are less than 8% on fuel consumption, to avoid any abuse of this offer.
Econokit installation should be done by Authorized Installer.
|